dmesg - ARMv7 rev 2
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.915 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 13.183 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 28 [1/0 us]
PM: resume of devices complete after 621.312 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 28 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 28 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 28 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 84.745 msecs
PM: late suspend of devices complete after 34.606 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 23.160 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 29 [1/0 us]
PM: resume of devices complete after 641.074 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 29 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup 1
pxau2o-ehci d4208000.usb: suspend root hub
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb usb1: usb auto-resume
pxau2o-ehci d4208000.usb: resume root hub
dcon_source_switch to DCON
olpc-dcon: The DCON has control
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb auto-resume
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 29 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 29 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 124.023 msecs
PM: late suspend of devices complete after 45.288 msecs
PM: noirq suspend of devices complete after 0.885 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.915 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 23.099 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 30 [1/0 us]
PM: resume of devices complete after 641.287 msecs
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 30 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 30 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 30 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 84.318 msecs
PM: late suspend of devices complete after 44.981 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.915 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 13.183 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 31 [1/0 us]
PM: resume of devices complete after 641.106 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 31 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: missed loading, retrying
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 31 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 31 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
olpc-dcon: The DCON has control
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 100.644 msecs
PM: late suspend of devices complete after 38.695 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
PM: early resume of devices complete after 13.153 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
olpc-dcon: The CPU has control
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 32 [1/0 us]
PM: resume of devices complete after 631.285 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 32 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 32 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 32 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 84.745 msecs
PM: late suspend of devices complete after 34.545 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 13.153 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
olpc-dcon: The CPU has control
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 33 [1/0 us]
PM: resume of devices complete after 631.192 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 33 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 33 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 33 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 85.050 msecs
PM: late suspend of devices complete after 34.239 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.915 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 13.122 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 34 [1/0 us]
PM: resume of devices complete after 641.293 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 34 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 34 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 34 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 84.257 msecs
PM: late suspend of devices complete after 35.063 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.915 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 13.122 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
olpc-dcon: The CPU has control
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 35 [1/0 us]
PM: resume of devices complete after 641.228 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 35 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
olpc-dcon: The DCON has control
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 35 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 35 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 85.050 msecs
PM: late suspend of devices complete after 34.239 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 23.129 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 36 [1/0 us]
PM: resume of devices complete after 641.226 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 36 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 36 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 36 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 83.982 msecs
PM: late suspend of devices complete after 35.247 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 23.132 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 37 [1/0 us]
PM: resume of devices complete after 631.253 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 37 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 37 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 37 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 84.257 msecs
PM: late suspend of devices complete after 45.042 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.915 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: early resume of devices complete after 13.153 msecs
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
olpc-dcon: The CPU has control
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 38 [1/0 us]
PM: resume of devices complete after 661.272 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 38 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
dcon_source_switch to DCON
olpc-dcon: The DCON has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 38 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 38 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: keeping power over suspend
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
PM: suspend of devices complete after 85.050 msecs
PM: late suspend of devices complete after 44.158 msecs
PM: noirq suspend of devices complete after 0.884 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
PM: early resume of devices complete after 23.132 msecs
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
sdhci_wakeup_irq
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
dcon_source_switch to CPU
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
olpc-dcon: The CPU has control
pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 39 [1/0 us]
PM: resume of devices complete after 631.222 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 39 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 39 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 39 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mwifiex_sdio mmc0:0001:1: PREP_CMD: card is removed
mmc0: card 0001 removed
mmc0: dropping power over suspend
PM: suspend of devices complete after 1552.111 msecs
PM: late suspend of devices complete after 37.261 msecs
PM: noirq suspend of devices complete after 0.854 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
PM: early resume of devices complete after 23.193 msecs
mmc0: done resetting wlan
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 40 [1/0 us]
PM: resume of devices complete after 671.125 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
mmc0: new high speed SDIO card at address 0001
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
cfg80211: Calling CRDA for country: US
systemd-udevd[5058]: renamed network interface mlan0 to eth0
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 40 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
usb 1-1: usb auto-resume
pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
usb 1-1: finish resume
hub 1-1:1.0: hub_resume
pxau2o-ehci d4208000.usb: reused qh ec2e0200 schedule
usb 1-1: link qh256-0001/ec2e0200 start 40 [1/0 us]
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 40 [1/0 us]
usb 1-1: usb suspend, wakeup 0
hub 1-0:1.0: hub_suspend
usb usb1: bus suspend, wakeup 0
pxau2o-ehci d4208000.usb: suspend root hub
mmc2: dropping power over suspend
mmc1: dropping power over suspend
mmc0: card 0001 removed
mmc0: dropping power over suspend
PM: suspend of devices complete after 462.093 msecs
PM: late suspend of devices complete after 37.170 msecs
PM: noirq suspend of devices complete after 0.854 msecs
Disabling non-boot CPUs ...
IRQ45 no longer affine to CPU1
CPU1: shutdown
CPU1: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
genirq: Flags mismatch irq 45. 00015220 (timer0) vs. 00015220 (timer0)
CPU1 is up
PM: noirq resume of devices complete after 0.885 msecs
PM: early resume of devices complete after 43.082 msecs
mmc0: done resetting wlan
pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
usb usb1: usb resume
pxau2o-ehci d4208000.usb: resume root hub after power loss
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 1: status 0507 change 0000
usb 1-1: usb resume
usb 1-1: finish reset-resume
usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
hub 1-1:1.0: hub_reset_resume
hub 1-1:1.0: enabling power on all ports
usb 1-1: link qh256-0001/ec2e0200 start 41 [1/0 us]
PM: resume of devices complete after 671.155 msecs
hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
Restarting tasks ... done.
mmc0: new high speed SDIO card at address 0001
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
systemd-udevd[5058]: renamed network interface mlan0 to eth0
hub 1-1:1.0: hub_suspend
usb 1-1: unlink qh256-0001/ec2e0200 start 41 [1/0 us]
usb 1-1: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup 1
pxau2o-ehci d4208000.usb: suspend root hub
dcon_freeze_store: 1
dcon_source_switch to DCON
olpc-dcon: The DCON has control
dcon_freeze_store: 1
dcon_freeze_store: 0
dcon_source_switch to CPU
olpc-dcon: The CPU has control
dcon_freeze_store: 0
dcon_freeze_store: 0
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)